产品内页
home Products CNC Machine

CNC Machining Center Carousel ATC CR2128ATC-C

share to:

Mainly used for the production and processing of panel furniture and cabinet door panels, intelligent automatic feeding, rapid drilling, grooving, 
engraving and cutting and processing, processing common panel furniture two-in-one, three-in-one connector installation holes,
It has the function of processing some types of invisible connectors; the follow-type straight tool magazine can quickly and accurately change tools. 

This machine is suitable for diversified and complex product processing or diverse processing. 
It has a wide range of uses: one-time blanking, drilling, cutting, and engraving Etc.; 
simple operation, especially suitable for customized production and processing; 
supporting CNC five/six-sided drilling, front-end intelligent automatic and efficient cutting and cutting, without turning plate processing, 
automatic queuing and continuous processing, simple operation, high productivity, and labor saving.

Specification

CR2128ATC-C

Maximum processing size

2100 x 2800 x 100mm

Feeding speed (m/min)

XY:≤70、Z:≤20

Distance from spindle nose to table

60~320mm

Transmission

XY axis rack drive

Z-axis screw drive

Run command

G code

Power

20KW

Voltage

3PH AC 380V/50HZ

Air pressure

≧6.5Kgf/cm²

Tool magazine parameters

Carousel tool magazine with 12 tools

Work table structure

Vacuum adsorption worktable

Main configuration

Operating system

Taiwan Delta/Syntec

Drive System

Taiwan Delta/ Syntec

Reducer

Japan Shimpo

Guide rail

Taiwan linear guide H25

Transmission rack

Taiwan T-WIN precision helical rack

Pneumatic solenoid valve

AirTAC

Main electrical parts

Schneider

Main spindle

9.0KW Air cooling ATC spindle

Transmission screw

Taiwan PMI

Vacuum pump

11.0KW water vacuum pump

Features

Feature:

1.The 9.0KW high-power spindle is suitable for high-speed cutting and blanking, and the large-capacity in-line tool magazine 
saves tool change operation time;

2.Both conventional panel furniture production technology and invisible part technology can be processed;

3.Taiwan's Syntec/Delta humanized control system, Chinese and English interface can be switched, the system is powerful,  
the operation is simple.Among them, the Delta system industry's first one-key milling of liners (750Kg/m3 density fiberboard) 
one-key processing of liners The installation holes of embedded parts can be automatically queued for continuous processing;

4.Thick-wall welded steel heavy-duty gantry and bed, the equipment runs at high speed, low vibration, low noise, 
stable operation,high-speed cutting is not easy to chip, continuous cutting;

5.Double-layer vacuum partition adsorption table to ensure that the small board processing does not run off;

6.During the production process of the whole machine and before leaving the factory, 
it undergoes strict quality inspection and control and test machining tests to ensure that the back plate grooves and the front 
and back holes are accurately punched.

7.Docking the automatic labeling machine, intelligent automation first labeling and then opening the material, reducing manual 
intervention and preventing errors and sheet waste caused by manual labeling.

Details

leave a message

Please fill in the form with your details and we will get back to you as soon as possible.